Change what a building says without touching the building. A wrap delivers a facade-scale rebrand in days, at a fraction of the cost and disruption of repainting or recladding.

Get a Free Quote

Construction scaffolding covered with printed branded wrap graphics

Construction & Renovation Site Wraps

Cover scaffolding or an unfinished facade with branded graphics instead of leaving it bare. A wrapped site markets the finished project while the work is still underway.

Get a Free Quote

Building exterior with a temporary promotional graphic wrap

Temporary Event & Promotional Wraps

Launches, seasonal campaigns, sponsorships, and events. Printed, installed, and removed on your campaign schedule with no permanent alteration to the structure.

Get a Free Quote

Storefront glass covered with large-format perforated window graphics

Large-Format Storefront Window Graphics

Full-glass coverage at building scale, including perforated film that keeps the view out from inside. For smaller-scale storefront work, see window & wall graphics.

Get a Free Quote

Durability

Materials Built for Southern California Weather

Looking good on install day is the easy part.

Exterior wrap material has to survive sustained UV exposure and heat, not just look sharp the week it goes up. In Southern California that's the whole specification question — a wrap that would last comfortably in a milder climate can chalk, fade, and lift years early on a west-facing SoCal elevation.

We spec UV-stable, fade-resistant vinyl rated for multi-year outdoor exposure, with adhesive systems chosen for the actual surface — smooth panel, stucco, masonry, or glass all behave differently under thermal cycling.

For wrapped storefront glass, perforated window film keeps the graphic solid from the street while maintaining visibility from inside, so occupied space behind the glass doesn't go blind for the length of the campaign.

Weatherproof lamination goes over the print for added durability against sun and moisture. It's the single cheapest thing you can add to an exterior wrap and the first thing a low bid leaves off.

Before You Commit

Permitting Considerations

Real information, stated at the confidence level it deserves.

Large exterior graphics and building wraps can be subject to local sign ordinances, and requirements vary significantly by city — size limits, illumination rules, and permit requirements are set at the municipal level, not statewide.

We can help design within common local constraints, but permitting is ultimately the property owner's responsibility, and we'd recommend confirming requirements with your city's planning or building department before a large-scale wrap project — especially for anything visible from a public right-of-way.

What we will do is provide accurate dimensions, material specifications, and mockups in whatever format your city or your sign consultant needs to review an application.

How We Work

Design & Installation Process

Four steps, including the access planning most quotes skip.

Site Assessment & Measurement

We measure the facade and evaluate the practical constraints — surface material and condition, structural attachment points, wind exposure, and how crews will physically reach every part of the surface.

Design & Proofing

Artwork is developed or adapted at facade scale, then proofed against a photo of the actual building so you see how it reads from the street before anything is produced.

Weather-Rated Printing & Lamination

Printed on UV-stable outdoor media with a weatherproof laminate, panelized for the elevation so seams fall on architectural lines rather than across the middle of your logo.

Professional Installation

Installed by crews working from lifts or scaffolding on taller buildings, with panel alignment set to a surveyed grid so the image stays true across multiple stories.

FAQs

Building Wrap Questions

How long do exterior wraps last outdoors?

It depends on material grade and orientation. A quality UV-stable wrap with weatherproof lamination is specified for multi-year outdoor service, but a south or west elevation in full SoCal sun will age faster than a shaded north face. We give you a realistic expectation for your specific building rather than a brochure number.

Do I need a permit for a building wrap?

Quite possibly — and you need to confirm that locally. Sign ordinances are set at the municipal level and vary significantly by city, especially for anything visible from a public right-of-way. Check with your city's planning or building department before committing to a large-scale wrap. We design and install; permitting is the property owner's responsibility.

Can wraps go over window glass without blocking visibility from inside?

Yes. Perforated window film is made for exactly this — printed graphics read as solid from outside while occupants keep a usable view out. It does reduce interior light somewhat, which we'll factor into the design where occupied space is behind the glass.

What happens to the wrap in extreme heat or wind?

Properly specified and installed material handles Southern California heat and normal wind loading. Failures almost always trace to under-spec material, poor surface prep, or edges that weren't sealed. Wind exposure on tall or corner elevations is part of what we assess before quoting.

Can wraps be used for temporary events and then removed cleanly?

Yes. Removable-adhesive systems are standard for event and campaign work, and professional removal takes both the film and its adhesive off without damaging the underlying surface. Tell us the intended duration up front — it changes which material we spec.

Do you handle wraps for multi-story or high-access buildings?

Yes, with lift or scaffolding access arranged as part of the project. Access equipment, site safety, and any building-management coordination are scoped into the proposal so there are no surprises on install day.

Keep Exploring